The Features of Dry Lubricants and How Does it Take Centre Stage

 

Features of Dry Lubricants

Dry lubricants fall into the category of solid film lubricants. Though the main objective is to trim down the levels of fiction, the moment two surfaces are known to move against each other. One of the features of dry lubricants is as it provides a form of coating in the form of corrosion resistance, that is known to eradicate galling or seizing among the moving surface. If you require a constant form of lubrication dry lubricants work out to be the best bet.

Features of dry lubricants that you have to consider

Starting off the major benefit of a dry lubricant is that it is not going to require any form of grease or oil. This is known to provide, a cleaner option like oil or grease that accumulates a lot of dust or dirt. Therefore, it is known to provide a fixed form of lubrication that has an enhanced form of pressure or load on being compared to oil or grease.

If you are not going to allow the surfaces to be dealt with properly. This is even before the coating application as it is something that you need to comply with on all counts. Hence it is going to reduce some of the forms of lubricating. There are certain features of dry lubricants, that could be providing chemical resistance in comparison to others. For this reason, you need to be aware on what are the reasons why you need to be using a dry lubricant pertaining to the application.

The situations that warrant the use of a dry lubricant

There are a series of situations that may require the use of a dry lubricant. On careful observation, the list is as follows

• If you find that the metal is being exposed to any form of corrosive substances

• The metal surfaces that is being stored for a prolonged period of time.

• If you come across the fact that there is a preference for a cleaner operation

• When a frequent disassembly of the parts may occur.

• If you figure that the operating capacity is expected to reduce, or find that there is a need for a protective form of coating.

• The moment materials depart a factor they have to be lubricated as permanent lubrication is something that may be necessary.

• When fretting or galling happens to be an issue. Examples could be in the form of universal joints, keyed bearings along with joints and splines.

As far as the choice of a lubricant involves it calls for a massive degree of research. It is necessary for a quality company to be having technical staff who are going to deal with the task to perfection.