Stainless Steel Pipe: What Changes When the Installation Is Above Ground, Buried or Indoor?

Stainless steel performs exceptionally well when it is buried underground for long periods. But when it comes into contact with moisture, aggressive chemicals, or stray current, it starts to corrode. Therefore, buried stainless steel requires proper consideration when compared to stainless steel above ground.

Factors that can influence the performance of buried stainless steel pipe are the pH value of the soil, soil resistivity, moisture content, and the presence of chemicals and stray currents.

The PH value of the soil in which the pipe is buried plays a major role in causing corrosion and degradation. Soil acidity is produced by decomposition of acidic plants, mineral leaching, industrial wastes, acid rain and certain microbiological activities. If the pH value is greater than 4.5, then corrosion of the buried pipe is unlikely. Backfilling the pipe ditches with sand can provide reliable long-term protection against corrosive soils.

Soil resistivity usually decreases when the moisture content or the concentration of chemicals increases. Sandy soils have a high corrosion resistance, while silt soils are highly corrosive. A low resistivity means the soil will be a good electrolyte.

When the current flows through other paths than the intended circuit, it is called stray current. When an outside source forces current through a cell, the corrosion occurs at the anode, where the conventional current leaves the metal. The most common sources of current are current-driven trains and trams. If the current’s intended path is not insulated from the soil, then it can damage the pipeline. It will corrode the pipe at the point where the current leaves to rejoin the original circuit. Current generally does not cause corrosion, but a portion of AC may get rectified to DC, which causes corrosion. 

Other important factors that can affect the buried pipe are chloride ion concentration, moisture and the presence of sulphate ions. Chloride content can diminish the soil resistivity and provide a more favourable condition for corrosion. Chlorides are found naturally in geographical seabeds, brackish groundwater and external sources like chemicals applied on roads. Sulphates are considered less reactive than chlorides. But sulphates can be converted to highly corrosive sulphides by anaerobic bacteria.

Many types of bacteria can cause microbiologically influenced corrosion of stainless steel when buried. Sulphate-reducing bacteria are the cause of accelerated corrosion in steel structures and ships. Iron and manganese oxidising bacteria are associated with accelerated pitting attacks on stainless steel.

Enhancing the reliability of buried pipes

When the system is situated above and below the ground, decide on a common grade of stainless steel for the entire structure. If you plan to use different materials, then ensure that one metal is insulated from the other. 

Austenitic stainless steel grades are widely used in piping to handle fresh water. Following their guidelines can prevent crevice and pitting corrosion.

Duplex stainless steel is a combination of ferritic and austenitic steels, and it can resist stress corrosion, pitting, cracking, and crevice attack.

Super duplex stainless steel has higher levels of molybdenum and chromium. This steel has a higher resistance to acid and corrosion.

Comments

Popular posts from this blog

Cylindrical Bearing Catalog to Find the Most Suitable Bearing for Your Applications

Mastering Indian Rummy Free: A Complete Guide to Playing and Winning

Various Features and Uses of a Taper Lock Bearing in Industry